Zinc recovery from hazardous construction wastes via an integrated process of the air classification,alkaline leaching,and water washing

Zinc- and lead-containing wastes are often mixed with construction and demolition wastes in many factories, generating abundant of heavy metal-enriched hazardous waste. In the present study, a novel integrated process of air classification, alkaline leaching, and water washing dechlorination was proposed for the efficient recycling of Zinc (Zn) resources. The first air classification process was realized via venturi tube, wherein the content of Zn could increase by 20 wt.%. After that, the product underwent an alkaline leaching process. Results showed that Zn recovery rate increased with fine particle sizes, and a 65% recovery rate was obtained under the following conditions of 5 mol/L NaOH, liquid/solid 10:1, and leaching time 1 h. Finally, water washing associated with microwave and ultrasonic treatments could remove over 85% of Cl and other water-soluble salts. All the results indicated that the integrated method had an excellent recovery rate for Zn resources from construction and demolition wastes.     

丙烯腈生产废水中聚合物的资源化利用

以丙烯腈生产废水中的丙烯腈低聚物为原料制备聚丙烯酰胺。通过正交实验考察了水解反应条件和交联反应条件对反应的影响。FTIR表征结果显示,丙烯腈低聚物中的氰基已完全水解为酰胺基,产物聚丙烯酰胺中含有酰胺基和羧基。实验结果表明,在自来水加入量100 m L、水解反应温度95℃、m(Na OH)∶m(丙烯腈低聚物)=2.0、水解反应时间3 h的最佳水解反应条件,交联反应温度60℃、质量分数37%~40%的甲醛加入量6 m L、交联反应时间2 h的最佳交联反应条件下,处理20 g丙烯腈低聚物,可得到产物聚丙烯酰胺14.50 g,聚丙烯酰胺的水解度为21.1%、相对分子质量为2.7×106。产品性能满足Q/SH 0046—2007《钻井液用聚丙烯酰胺技术要求》中部分水解聚丙烯酰胺的性能要求。     

基于物质流分析的钾素流动与循环研究

我国钾矿资源匮乏,自给率低,主要的使用和流动过程集中在种植业活动中.本研究利用物质流分析方法对2009年我国种植业生产和消费过程中钾素的流动和循环过程进行了解析.结果表明,农田土壤钾素平均亏损量达到50.4 kg·hm-2,大量钾素由陆生生态系统进入水生生态系统,造成资源流失.伴随降雨径流进入水环境的钾素达231.2万t·a-1,占当年化学钾肥施用量的40.97%.生活污水排放是钾素进入水体的另一主要途径,城市和农村区域的年排放量分别为67.1万t·a-1和54.7万t·a-1,占进入水环境钾素总量的19.00%和15.50%.其中通过城市污水处理厂排放进入地表水环境中钾素为50.5万t·a-1,占城市区域排放总量的75.25%.     

Removal of phosphate from wastewater using alkaline residue

Alkaline residue(AR) was found to be an efficient adsorbent for phosphate removal from wastewater. The kinetic and equilibrium of phosphate removal were investigated to evaluate the performance of modified alkaline residue. After treatment by NaOH(AR-NaOH), removal performance was significantly improved, while removal performance was almost completely lost after treatment by HCl(AR-HCl). The kinetics of the removal process by all adsorbents was well characterized by the pseudo second-order model. The Langmuir model exhibited the best correlation for AR-HCl, while AR was effectively described by Freundlich model. Both models were well fitted to AR-NaOH. The maximum adsorption capacities calculated from Langmuir equation were in following manner: AR-NaOH AR AR-HCl. Phosphate removal by alkaline residue was pH dependent process. Mechanisms for phosphate removal mainly involved adsorption and precipitation, varied with equilibrium pH of solution. For AR-HCl, the acid equilibrium pH( 6.0) was unfavorable for the formation of Ca-P precipitate, with adsorption as the key mechanism for phosphate removal. In contrast, for AR and ARNaOH, precipitation was the dominant mechanism for phosphate removal, due to the incrase on pH( 8.0) after phosphate removal. The results of both XRD and SEM analysis confirmed CaHPO4·2H2O formation after phosphate removal by AR and AR-NaOH.     

利用热活化过硫酸盐技术去除阿特拉津

利用热活化过硫酸盐(S2O2-8)技术去除水中的阿特拉津(ATZ).结果表明,增加溶液中S2O2-8浓度或提高溶液反应温度,可加速ATZ的降解.ATZ的降解是一个二级反应,其速率和溶液中ATZ和S2O2-8的浓度都成正比.初始pH为3.0~10.0时,S2O2-8对ATZ都有很好的降解效果,在酸性和中性时,降解效率高于碱性条件.利用自由基探针发现,在酸性和中性条件下,起降解作用的主要是SO·-4,而碱性条件下OH·占主导.ATZ的降解受到Cl-、CO2-3和腐殖质(HA)的影响.其中,Cl-对反应的影响比较复杂,低浓度时Cl-会生成具有高氧化还原电位的Cl·促进ATZ的降解,而高浓度时Cl·会继续反应生成氧化能力相对较弱的Cl2·-,从而抑制反应的进行.HA和CO2-3都对反应有明显的抑制作用.     

不同方法测定水体总氮存在的问题探讨及条件优化研究

利用碱性过硫酸钾消解紫外分光光度法,探讨了消解时间和消解温度对空白吸光值的影响,认为增加消解时间可以降低空白吸光值,而提高消解温度对空白吸光值的影响不大;对于某些样品中总氮含量低于氨氮含量的现象,将碱性过硫酸钾装入小试管,再放入装有水样的比色管中,虽然能够减少氨气形式逸出的氮含量,但回收率较低;连续流动和流动注射-盐酸萘乙二胺分光光度法,在以后的修订中应增加过硫酸钾含氮量以及镉柱还原能力大小的界定.     

Ammonium nitrate thermal decomposition with additives

Runaway reactions present a potentially serious threat to the chemical process industry and the community; such reactions occur time and time again often with devastating consequences. The main objective of this research is to study the root causes associated with ammonium nitrate (AN) explosions during storage. The research focuses on AN fertilizers and studies the effects of different types of fertilizer compatible additives on AN thermal decomposition. Reactive Systems Screening Tool (RSST) has been used for reactivity evaluation and to better understand the mechanisms that result in explosion hazards. The results obtained from this tool have been reported in terms of parameters such as “onset” temperature, rate of temperature and pressure rise and maximum temperature. The runaway behavior of AN has been studied as a solid and solution in water. The effect of additives such as sodium sulfate (Na₂SO₄) and potassium chloride (KCl) has also been studied. Multiple tests have been conducted to determine the characteristics of AN decomposition accurately. The results show that the presence of sodium sulfate can increase the “onset” temperature of AN decomposition thus acting as AN thermal decomposition inhibitor, while potassium chloride tends to decrease the “onset” temperature thus acting as AN thermal decomposition promoter.     

过硫酸盐缓释材料释放过程模型构建

为预测评估过硫酸盐缓释材料的释放性能,对释放过程模型的构建以及模型的验证进行了研究。借助微积分思想,从材料体的概化分割、初始条件设定、每个小单元的状态标定、各个小单元中过硫酸钾的迁移变化量以及材料最外层释放过硫酸盐的量5个方面构建过硫酸盐缓释材料释放模型,利用Excel-VBA编程实现其释放过程模拟。采用欧盟标准NEN7375测试过硫酸盐缓释材料释放性能并获得模型参数。通过输入相关模型参数得到过硫酸盐动态迁移过程及其释放特征曲线,并利用实测数据与模拟数据进行拟合校验。结果表明,模型模拟值与实测值拟合较好,平均误差为1.88%,表明该模型设计合理,能够准确模拟过硫酸盐缓释材料释放过程,可作为缓释材料优化设计工具。     

厌氧系统中碱处理对污泥减量的影响

碱解预处理污泥和原污泥按一定比例进行混合后,投入厌氧反应器中进行消化,研究其对污泥减量化的影响。结果表明,该处理既可以提高污泥减量率,又能改善污泥厌氧消化性能,提高污泥产气量。当碱处理污泥和原污泥混合比为1∶3时,在混合初期由于稀释作用和水解中和作用,溶液的pH能迅速恢复到中性。SS减少48%,较对照组提高了10%;SCOD减少约80%,较对照组提高20%,而空白对照组因未发生溶胞作用,各参数值均处于较低水平,降解率也维持在较低水平。